Mechanical Specifications - Xantrex XFR 6-200 Operating Manual

Mechanical
Specifications
Front Panel V and I Control
Front Panel Voltage Control
Resolution
Front Panel Voltage and Current
Meters
AC Input Connector Type
Input Fuses
Output Connector
Sense Connector
Analog Programming Connector
Chassis Ground
Cooling
Mounting
Weight
Approvals
Release 3.1
1
Features and Specifications
10-turn voltage and current potentiometers
0.02% of maximum voltage
3.5-digit green numeric LED displays. For
accuracy specifications, see Table 1.4 and
Table 1.5.
3-terminal 34 A, 250 V, right angle, PC mount, wire
clamp connector with removable strain relief cover
1 A, 250 V, 5 x 20 mm slow fuse (T), location: F34;
2 A, 250 V, 5 x 20 mm time delay (T), location:
F95;
10 A, 250 Vac, 5 x 20 mm fast high interrupt (F),
location: F29;
30 A, 300 Vac, 10.3 x 41.3 mm medium time lag
(T), locations: F2, F4.
6 V to 40 V models: nickel-plated copper bus bars
with removable bus bar shield; bus bar holes:
0.332 in. (8.17 mm) diameter (D) (1), 0.197 in. (5.0
mm) D (2);
60 V to 600 V models: 4-terminal wire clamp
connector.
5-terminal wire clamp connector (2 piece)
15-terminal wire clamp connector (2 piece)
Two chassis ground screws located on rear panel
for bonding connections
Fan cooled. Air exhausts to rear. Over temperature
shutdown: automatic restart or latch off
(switch-selectable).
Rack mount ears integral to the front panel.
Approximately 18 lb. (8.2 kg)
CE-marked units are approved to IEC 1010-1
safety standard and EN50081-2 and EN500082-2
EMC standards, and are CSA certified to C22.2
No. 1010.1. CE-marked units are also approved to
U.S. requirements of NRTL/C and are UL listed to
UL3111-1, 1st edition, (up to 40 °C). Additional
standards met: FCC, part 15, class A EMI
standard.
Specifications
33