Xantrex XFR 6-200 Operating Manual page 78

Remote Operation
Remote Analog Programming of Output Voltage and Current Limit
Table 4.2 Power Supply Settings for Different Programming Sources
Output Output Current Limit Programming Source
Voltage
0-5 Vdc
Programming
Source
0-5 Vdc SW1:
set 3 and 4
open.
J2: jumper 1 to
3 and 2 to 3.
0-10 Vdc SW1:
set 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-5 k Resistor SW1:
set 1 closed,
3 and 4 open.
J2: jumper 1 to
3 and 2 to 3.
0-10 k SW1:
Resistor set 1 closed,
4 open.
J2: jumper 1 to
3 and 2 to 3.
None (Front SW1:
Panel set 4 open.
Control) J2: jumper 2 to
3.
76
0-10 Vdc 0-5 k Resistor
SW1: SW1:
set 3 open. set 2 closed, 3
J2: jumper 1 to and 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 1 to 4 open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed, set 1 and 2
3 open. closed, 3 and 4
J2: jumper 1 to open.
3 and 2 to 3. J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
set 1 closed. set 1 and
J2: jumper 1 to 2 closed,
3 and 2 to 3. 4 open.
J2: jumper 1 to
3 and 2 to 3.
SW1: SW1:
default settings. set 2 closed,
J2: jumper 2 to 4 open.
3. J2: jumper 2 to
3.
0-10 k Resistor None (Front
SW1:
set 2 closed, 3
open.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 2 closed.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 1 and 2
closed,
3 open.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 1 and
2 closed.
J2: jumper 1 to
3 and 2 to 3.
SW1:
set 2 closed.
J2: jumper 2 to
3.
Operating Manual for XFR 1.2kW Series Power Supply
Panel Control)
SW1:
set 3 open.
J2: jumper 1 to
3.
SW1:
default settings.
J2: jumper 1 to
3.
SW1:
set 3 open,
1 closed.
J2: jumper 1 to
3.
SW1:
set 1 closed.
J2: jumper 1 to
3.
SW1:
default settings.
J2: no jumper