Table 41: Managed Access Point Vap Statistics - D-Link DWS-3000 Series User Manual

D-Link Unified Access System
Field
Duplicate Frame Count
Failed Transmit Count
Transmit Retry Count
Multiple Retry Count
RTS Success Count
RTS Failure Count
ACK Failure Count
FCS Error Count
Frames Transmitted
WEP Undecryptable Count
Click Refresh to update the screen with the most current information.
Viewing Managed Access Point VAP Statistics
The VAP statistics show information about the client failures and number of packets and bytes transmitted and received on
each VAP on radio one or two for a particular access point managed by the switch.
Table 41 describes the fields you see on the VAP page for the managed access point statistics.
Field
MAC Address -Location
(Menu)
Radio
(ex. 1-802.11g)
VAP ID
WLAN Packets Received
WLAN Bytes Received
WLAN Packets Transmitted
WLAN Bytes Transmitted
Client Association Failures
Client Authentication Failures
Page 136
Table 40: Managed Access Point Radio Statistics (Cont.)
Description
Number of times a frame is received and the Sequence Control field
indicates is a duplicate.
Number of times a MSDU is not transmitted successfully due to transmit
attempts exceeding either the short retry limit or the long retry limit.
Number of times a MSDU is successfully transmitted after one or more
retries.
Number of times a MSDU is successfully transmitted after more than one
retry.
Count of CTS frames received in response to an RTS frame.
Count of CTS frames not received in response to an RTS frame.
Count of ACK frames not received when expected.
Count of FCS errors detected in a received MPDU frame.
Count of each successfully transmitted MSDU.
Count of encrypted frames received and the key configuration of the
transmitter indicates that the frame should not have been encrypted or that
frame was discarded due to the receiving station not implementing the
privacy option.

Table 41: Managed Access Point VAP Statistics

Description
Shows the MAC address and location of the AP to which the values on the page
apply. To view information about a different AP, select its MAC address from the
menu.
Indicates a radio interface and its configured mode. Select one of the radios to
view its VAP statistics.
Select one of the 8 VAPs from the menu to display its statistics. All VAPs are
available regardless of whether they are enabled.
Total packets received by the AP on this VAP.
Total bytes received by the AP on this VAP.
Total packets transmitted by the AP on this VAP.
Total bytes transmitted by the AP on this VAP.
Number of clients that have been denied association to the VAP.
Number of clients that have failed authentication to the VAP.
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10