Figure 72: Configuring An Ap Profile - D-Link DWS-3000 Series User Manual

Software User Manual D-Link Unified Access System
02/15/2011
Figure 72 shows the layout for AP Profile configuration.

Figure 72: Configuring an AP Profile

Profiles
Profile Configuration Pages
To copy an existing profile and all of its configurations to a new profile, select the profile with the configuration to copy, enter
a name for the new profile, and click Copy.
To delete a profile, select the profile and click Delete.
Note: You cannot delete a profile if the switch is managing an access point that is currently using that profile.
Click Refresh to update the screen with the most current information.
To access an existing profile, click the tab with the name of the profile. When you add a new profile, it has the default AP
settings, which are listed in Appendix A "D-Link Unified Access System Default Settings". When you copy a profile, it has
the AP settings configured in the original profile.
To modify any settings within a profile, click the Global, Radio, Network or QoS settings for the profile you select and update
the appropriate fields.
For more information about the fields on the Global page, see "Configuring AAA and RADIUS Settings" on page 79.
For more information about the fields on the Radio page, see "Configuring Wireless Radio Settings" on page 81.
For more information about the fields on the Network page, see "Configuring SSID Settings" on page 86.
Document 34CS3000-SWUM104-D10 Page 155