Table 32: Managed Ap Radio Summary - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
Field
Software Version
Last Failing
Configuration Element
Configuration Failure
Error Message
Code Download Status
Associated Clients
Authenticated Clients
System Uptime
Age
Use the buttons at the bottom of the page to perform the following tasks:
• Click Refresh to update the screen with the most current information.
• When the Auto Refresh option is selected, the page will be refreshed after every 30 seconds.
• Click Reset to reset the managed AP.
Viewing Managed Access Point Radio Summary Information
You can view general information about each operational radio on all APs managed by the switch. The Managed Access
Point Radio Summary page shows the channel, transmit power, and number of associated wireless clients for all managed
APs. For more information about a specific radio on an AP, click the radio.
Table 32 describes the fields you see on the Radio Summary page for the managed access point status.
Field
MAC Address
Location
Radio
Channel
Transmit Power
Document 34CS3000-SWUM104-D10
Table 31: Detailed Managed Access Point Status
Description
Indicates the version of software on the AP, this is learned from the AP during discovery.
If the configuration status indicates a partial success or complete failure, this field indicates
the last element that failed during configuration. This field is only visible if there is a failed
element.
If the configuration status indicates a partial success or complete failure, this field contains an
ASCII string filled in by the AP containing the error message for the last failing configuration
element.
This indicates the current status of a code download request for this AP. The possible values
include the following:
• Not Started - A code download has not been requested for the AP.
• Requested - A code download has been requested for the AP, the switch has not processed
the request.
• In Progress - The switch is processing a code download request for the AP.
• Success - The AP has successfully downloaded the new software image.
• Failure - The AP failed to download the new software image.
Total number of clients currently associated to the AP. This is the sum of all associated clients
for all the VAPs enabled on the AP. Association is a transitional state.
Total number of clients currently authenticated to the AP. This is the sum of all authenticated
clients for all the VAPs enabled on the AP.
Time in seconds since last power-on reset of the managed AP.
Time since last communication between the WDS and the AP.

Table 32: Managed AP Radio Summary

Description
The Ethernet address of the Unified Switch managed AP.
A location description for the AP, this is the value configured in the valid AP database (either
locally or on the RADIUS server).
Indicates the radio interface and configured mode of the radio, if the radio is disabled the radio
mode will be displayed as Off instead of showing the configured mode.
If radio is operational, the current operating channel for the radio.
If radio is operational, the current transmit power for the radio.
D-Link Unified Access System
Page 129