Connecting To The External Redundant Power System; Connecting The Switch; Figure 26: Dws-3026 With Optional Dem-410X Module Installed; Figure 27: Rps Connector - D-Link DWS-3000 Series User Manual

D-Link Unified Access System

Connecting to the External Redundant Power System

The Switch supports an external redundant power system (RPS). The diagrams below illustrate a proper RPS power
connection to the Switch. Please consult the documentation for information on power cabling and connectors and setup
procedure.
DWS-3026
DPS-600
C S
ONNECTING THE
This section describes how to connect the following nodes:
• Switch to the network
• AP directly to the Switch
• AP to the Switch through the L2/L3 network
• Switch through the 10GB uplink to the network core
Note: All 24 high-performance N-Way Ethernet ports can support both MDI-II and MDI-X connections.
Page 48

Figure 26: DWS-3026 with optional DEM-410X module installed

Figure 27: RPS Connector

WITCH
Software User Manual
RPS Connector
Document 34CS3000-SWUM104-D10
02/15/2011