D-Link DWS-3000 Series User Manual page 174

D-Link Unified Access System
Table 65: CP Web Page Customization - Authentication Page (Cont.)
Field
Account Image
Account Title
User Label
Password Label
Button Label
AUP
Accept Label
Instructional Text
Denied Message
Resource Message
Timeout Message
Busy Message
No Accept Message
Page 174
Description
Select the optional account image that is stretched across the account column. To
download a new image to the switch, use the Available Image field. The image name is
0-32 characters. The default is login_key.jpg.
Enter the summary text to display that instructs users to authenticate. The range is 0-32
Unicode characters. The default is Enter your username.
Enter the text to display next to the field where the user enters the username. If the Guest
account and label is not empty, then the label is displayed with user prompting. The range
is 0-32 Unicode characters. The default is Username.
Enter the text to display next to the field where the user enters the password. The label is
not applicable for Guest accounts. The range is 0-64 Unicode characters. The default is
Password.
Enter the text to display on the button the user clicks to connect to the network. The range
is 2-32 Unicode characters. The default is Connect.
Text used to specify the appropriate Acceptance Use Policy. A default AUP is not
preloaded. The range is 0-8192 Unicode characters. The default is Acceptance Use
Policy.
Select the option to display the Accept label text. The range is 0-128 Unicode characters.
The default is Check here to indicate that you have read and accepted the Acceptance
Use Policy.
Enter the detailed text to display that instructs users to authenticate. This text appears
under the button. The range is 0-256 Unicode characters. The default is To start using
this service, enter your credentials and click the Connect button.
Enter the text to display when the user does not provide valid authentication information.
This message also appears when the user is not a member of the user group assigned
through the CP Configuration page. This message displays after the user clicks the
button to connect to the network. The range is 1-128 Unicode characters. The default is
Error: Invalid Credentials, please try again!
Enter the text to display when the system has rejected authentication due to system
resource limitations. This message displays after the user clicks the button to connect to
the network. The range is 1-128 Unicode characters. The default is Error: Limited
resources, please reconnect and try again later!
Enter the text to display when the system has rejected authentication because the
authentication transaction took too long. This could be due to user input time, or a timeout
due to the overall transaction. The range is 1-128 Unicode characters. The default is
"Error: Timed Out, please reconnect and try again!"
Enter the text to display when the Captive Portal is processing the authentication request.
This message displays after the user clicks the button to connect to the network. The
range is 1-128 Unicode characters. The default is Connecting, please be patient.
Enter the text to display when the user did not acknowledge t the acceptance use policy.
This message displays after the user clicks the button to connect to the network. The
range is 1-128 Unicode characters. The default is Error: You must acknowledge the
Acceptance User Policy before connecting!
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10