Software User Manual
02/15/2011
To create additional graphs, repeat the steps in this section.
Graphing the WLAN Components
The WLAN Visualization tool automatically shows the WLAN components that the switch has discovered.
The panel lists the following component types:
•
Switches (Unified Switch and peer Unified Switches)
•
Managed Access Points
•
RF Scan Access Points
These components appear in the panel on the left until you drag them onto the graph. From the View menu, you can choose
to view the components in a list view, which shows all three types of components in the left panel or in a tabbed view, which
shows one type of component at a time, organized by tabs.
of the same components. Access points are listed by location or MAC address, and switches are listed by IP address.
List View
Wireless clients do not appear in the panel. Instead, they are automatically graphed based on their association with (or
disassociation from) a D-Link Access Point that is graphed.
Document
34CS3000-SWUM104-D10
Figure 101
Figure 101: List View and Tabbed View
Tab View
D-Link Unified Access System
shows an example of a list view and a tabbed view
Page 195