D-Link Unified Access System
Viewing Interface Activation Status
The Interface Activation Status page shows information for every interface assigned to a captive portal instance. Use the
menus to select the portal or interface with the information you want to view.
Table 75
describes the fields on the Interface Activation Status page.
Field
Operational Status
Disable Reason
Blocked Status
Authenticated Users
Click Refresh to update the screen with the most current information.
Viewing Interface Capability Status
The Interface Capability Status page contains information about interfaces that can have CPs associated with them. The
page also contains status information for various capabilities. Specifically, this page indicates what services are provided
through the CP to clients connected on this interface. The list of services is determined by the interface capabilities.
Page 184
Figure 91: Interface Activation Status
Table 75: Interface Activation Status
Description
Shows whether the portal is active on the specified interface. Possible values are Enabled or
Disabled.
If the selected CP is disabled on this interface, this field indicates the reason, which can be
one of the following:
• Interface Not Attached
• Disabled by Administrator
Indicates whether the captive portal is temporarily blocked for authentications. Possible
values are:
• 0 – Not blocked
• 1 – Blocked
The default is 0.
Displays the number of authenticated users using the captive portal instance on this interface.
The default is 0.
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10