Viewing Associated Client Vap Status; Viewing Associated Client Statistics; Table 49: Associated Client Ssid Status; Table 50: Associated Client Vap Status - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
Field
SSID
MAC Address
Channel
Status
Click Refresh to update the screen with the most current information.

Viewing Associated Client VAP Status

Each AP has 8 Virtual Access Points (VAPs) per radio, and every VAP has a unique MAC address (BSSID). The VAP
Associated Client Status page shows information about the VAPs on the managed AP that have associated wireless clients.
Field
BSSID
SSID
AP MAC Address
Location
Radio
Client MAC Address
Tunnel IP Address
Click Refresh to update the screen with the most current information.

Viewing Associated Client Statistics

A wireless client can roam among APs without interruption in WLAN service. The D-Link Unified Switch tracks the traffic the
client sends and receives during the entire wireless session while the client roams among APs that the switch manages. The
switch stores statistics about client traffic while it is associated with a single AP as well as throughout the roaming session.
The statistics on the Association Summary page show information about the traffic a wireless client receives and transmits
while it is associated with a single AP.
Field
MAC Address
Document 34CS3000-SWUM104-D10

Table 49: Associated Client SSID Status

Description
Indicates the network on which the client is connected.
The Ethernet address of client station.
Indicates the operating channel for the client association.
Indicates whether or not the client has associated and/or authenticated. The valid values are:
• Associated - The client is current associated to the managed AP.
• Authenticated - The client is currently associated and authenticated to the managed AP.
• Disassociated - The client has disassociated from the managed AP, if the client does not
roam to another managed AP within the client roam timeout, it will be deleted.

Table 50: Associated Client VAP Status

Description
Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.
The SSID the client is using to connect to the WLAN.
This field indicates the base AP Ethernet MAC address for the managed AP.
The descriptive location configured for the managed AP.
Displays the managed AP radio interface the client is associated to and its configured mode.
The Ethernet address of client station.
If the client is using an L3 Tunnel, this field shows the IP address of the client. Otherwise, this
field is blank.

Table 51: Associated Client Association Summary Statistics

Description
The Ethernet address of client station.
D-Link Unified Access System
Page 147