Changing The Captive Portal Settings; Figure 80: Captive Portal Configuration; Table 63: Cp Configuration - D-Link DWS-3000 Series User Manual

D-Link Unified Access System
Click Refresh to update the screen with the most current information.

Changing the Captive Portal Settings

By default, the D-Link Unified Switch has one captive portal. You can change the settings for that captive portal, and you
can also create and configure up to nine additional portals. After you create a captive portal from the CP Summary page,
you can change its settings.
Table 63 describes the fields on the CP Configuration page.
Field
Enable Captive Portal
Configuration Name
Page 168

Figure 80: Captive Portal Configuration

Table 63: CP Configuration

Description
Select the check box to enable the CP. Clear the check box to
disable it. The default is Enable.
This field allows you to change the name of the portal added from
the CP Summary page. The range is 0-32 characters. The default
name is Default.
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10