Viewing The Captive Portal Global Status; Table 72: Global Captive Portal Configuration - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
Table 72 describes the fields on the Interface Association page.
Field
CP Configuration
Associated Interfaces
Interface List
Use the following steps to associate one or more interfaces with a captive portal.
1 Select the desired captive portal from the CP Configuration list.
2 Select the interface or interfaces from the Interface List. To select more than one interface, hold the Ctrl key and click
multiple interfaces.
3 Click Add.
Note: When you associate an interface with a captive portal, the interface is removed from the Interface List. Each
interface can be associated with only one CP at a time.
Use the following steps to remove an interface from the Associated Interfaces list for a captive portal.
1 Select the desired captive portal from the CP Configuration list.
2 In the Associated Interfaces field, select the interface or interfaces to remove. To select more than one interface, hold
the Ctrl key and click multiple interfaces.
3 Click Delete.
The interface is removed from the Associated Interface list and appears in the Interface List.
Click Refresh to update the screen with the most current information.

Viewing the Captive Portal Global Status

The CP Global Status page contains a variety of information about the CP feature. From the CP Global Status page, you
can access information about the CP activity and interfaces.
To view captive portal status information, click Security > Captive Portal > CP Status.
Document 34CS3000-SWUM104-D10

Table 72: Global Captive Portal Configuration

Description
Lists the captive portals configured on the switch by number and name.
Lists the interfaces that are currently associated with the selected captive portal. Wireless
interfaces are identified by the wireless network number and SSID. Physical (wired) interfaces
are identified by the Port Description that includes slot number, port number, and interface
type.
Lists the interfaces available on the switch that are not currently associated with a CP.
Wireless interfaces are identified by the wireless network number and SSID. Physical (wired)
interfaces are identified by the Port Description that includes slot number, port number, and
interface type. The range is an integer.
D-Link Unified Access System
Page 181