Wds Settings - Ovislink N.Power User Manual

When a packet is sent out from one wireless station to the other, it will
AckTimeOut:
wait for an Acknowledgement frame from the remote station. The station will only
wait for a certain amount of time; this time is called the ACK timeout.
conditions, please do not change the Tx and Rx Acktimeout value. The
N.Power's default value is correct in most case.s.

8.2.3 WDS Settings

For Bridge network, it is required to enter the Wireless MAC address of all remote bridges
that is connected directly to your N.Power. The wireless MAC address is also known as
BSS ID.
Encryp Type: You can use one of the following 4 encryption type.
None: No encryption is made. This is not recommended as it posts serious
security issue.
WEP: This is the most compatible type. However, it is also easier for
hackers to break. Use this only if AES or TKIP doesn't work.
TKIP: Temporal Key Integrity Protocol, TKIP is more secured than WEP but
less secure than AES.
AES: The most secured encryption method. It is highly recommended to
use this method unless for compatibility issue.
77
8. WDS Bridge Mode
In most
AirLive N.Power User's Manual