Led Table; Restore Settings To Default - Ovislink N.Power User Manual

2.5 LED Table

This section describes the LED behavior of N.Power. You can find the LED on the top
side of the N.Power.
WPS (Power)
Steady Blue – Normal Operation
Slow Flashing: WPS Surveying
OFF – No Power
WLAN
Slow Flashing :
Fast Flashing:
OFF: Radio Disabled
LAN1 ~4, WAN
Steady Blue :
Fast Flashing:
OFF: No Link

2.6 Restore Settings to Default

If you have forgotten your N.Power's IP address or password, you can restore your
N.Power to the default settings by pressing on the "reset button" for more than 10 seconds.
You might need a pen or pencil for this operation. The reset button is inside the bottom
case. Please see diagram below for details.
AirLive N.Power User's Manual
Radio is active
Transmitting Data
Link established
Transmitting Data
12
2. Installing the N.Power