Access Control - Ovislink N.Power User Manual

Procedure to make encryption
Step1: Select your SSID: If you have enabled the "Multiple SSID" function, there will
be more than one SSID to choose from. Each SSID (Virtual AP) can have its own
security policy.
Step2: Select Security Policy: N.Power offers a full suite of security policy including
WEP(Pre-Shared Key), WPA(certificate), WPA-PSK(AES), WPA2-PSK(AES), and
802.1x Radius Authentication. Recently WiFi regulation prevents the use of TKIP
encryption in 11n mode. Therefore, the TKIP is only available in 11b/g mode.
highly recommend using WPA2-PSK AES Encryption as the easiest and much
secured scheme for encryption.

4.4.5 Access Control

Wireless Settings -> Access Control
The N.Power allows you to define a list of MAC addresses that are allowed or denied to
access the wireless network. This function is available only for Access Point and AP
Router modes. This function is available only for Access Point and Gateway modes.
AirLive N.Power User's Manual
4. Configuration: Router Mode
36
We