Table of Contents
Advertisement
2. Installing the N.Power
2.4.1 Passive PoE Installation
If you want to supply the power by using Passive PoE, please follow the installation
diagram below. Please note that the passive DC Injector is not included with N.Power, it
needs to be purchased separately (AirLive Model: PoE-1P). N.Power uses 12V passive
PoE system, it doesn't work with 802.3af PoE switch or 48V PoE Kit. It is recommended
to use a power adapter of 12Vdc at 1.25A or greater if you have the USB Storage installed.
AirLive N.Power User's Manual
10
Advertisement
Table of Contents
