Client Mode; Wds Bridge Mode - Ovislink N.Power User Manual

1. Introduction

1.4.3 Client Mode

The N.Power acts as if it is a wireless adapter to connect with a remote Access Point.
Users can attach a computer or a router to the LAN port of N.Power to get network access.

1.4.4 WDS Bridge Mode

This mode is best used when you want to connect LAN networks together wirelessly (for
example, between office and warehouse). WDS Bridge using WPA-PSK or WPA2-PSK
encryptions might be limited to devices using the same wireless chipset.
WDS Bridge works by entering remote Bridge's wireless MAC address on the WDS table.
You can find the MAC address on the bottom label of the N.Power.
AirLive N.Power User's Manual
4