Table of Contents
Advertisement
7. Client Mode
1
2
3
Select the SSID that you want to connect. Choose WPS mode to "Enrollee" and get a PIN
Code in the field. Then press "PIN Start" and the "WPS" LED flash will light two minutes
on the device's housing.
4
6
5
Copy PIN Code
7
Under AP site, Select Wireless Setting
WPS Setting. Choose WPS mode to "PIN" then
enter the PIN Code
click "Apply" and the connection will automatically configure.
8
9
Enter PIN Code
10
10
AirLive N.Power User's Manual
72
Advertisement
Table of Contents
