Wps Settings - Ovislink N.Power User Manual

AES: The most secured encryption method. It is highly recommended to
use this method unless for compatibility issue.
Encryp Key: Please enter your encryption key here.
MAC Address: Please enter the Wireless MAC address or BSSID of the remote
Bridge. You can usually find it at remote Bridge's device label.

4.4.11 WPS Settings

Example1: Using Hardware Push button
Please push WPS button directly on the back of the N.Power. The "WPS" LED flash will
light and the N.Power will start to survey the client's WPS signal in the current environment.
Please be noticed that, within two minutes, you have to turn on the utility of your wireless
network card and click PBC to connect automatically.
If you also have a hardware WPS button on your wireless card, you can push the button
immediately now. If not, you can usually find the WPS PBC function in the wireless utility.
Below is an example using AirLive WN-360USB wireless network card to connect with
N.Power.
AirLive N.Power User's Manual
4. Configuration: Router Mode
44