Change Operation Mode - Ovislink N.Power User Manual

3. Configuring the N.Power
Step 5: Please click "Finish" to reboot the system if you are sure about all settings.

3.5 Change Operation Mode

The wireless settings of N.Power are dependant on the wireless operation mode you
choose. For explanation on when to use what operation mode, please refer to Chapter 1
Changing Mode Procedure:
1. Select "Wireless Setting"
2. Choose your required wireless mode.
3. The AP might ask you to confirm the mode change. Once confirm, the AP will reboot to
its new mode.
Note:
When you change from Router mode to other modes, the DHCP server will be turned off. In
this case, you must manually configure your PC's IP address to the same subnet as the
N.Power. Likewise, when you change from other modes to Router mode, the DHCP server will be
turned on.
Mode Change
AirLive N.Power User's Manual
17