Table of Contents
Advertisement
3. Making Configuration
3.1.3 Wireless Settings
Wireless settings allow you to set the wireless configuration items.
Wireless Module: You can enable or disable wireless function.
Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client
stations can roam freely over this device and other Access Points that have the same Network
ID. (The factory default setting is "default")
SSID Broadcast: The router will broadcast beacons that have some information, including
SSID so that wireless clients can know how many AP devices by scanning the network.
Therefore, if this setting is configured as "Disable", the wireless clients can not find the device
from beacons.
Channel: The radio channel number. The permissible channels depend on the Regulatory
Domain. The factory default setting is as the following: channel 6 for North America; channel 7
for European (ETSI); channel 7 for Japan.
Wireless Mode: Choose "B/G mixed", "B only", "G only", "N only", "G/N mixed" or "B/G/N
mixed". The factory default setting is "B/G/N mixed".
Authentication mode: You may select one of the following authentications to secure your
wireless network: Open, Shared, Auto, WPA-PSK, WPA, WPA2-PSK, WPA2,
WPA-PSK/WPA2-PSK, or WPA /WPA2.
26
AirLive GW-300NAS User's Manual
Advertisement
Table of Contents
