Wds Repeater Mode - Ovislink N.Power User Manual

1.4.5 WDS Repeater Mode

The purpose of repeater is to extend the wireless signal of the remote AP/Router.
N.Power, the AP mode and the Router mode also turn it to "WDS Repeater mode." You can
find the WDS settings in the "Wireless Settings" page.
connection to work.
WDS Repeater in Router Mode
The WDS Repeater function in Router mode is to allow the remote AP to extend the
wireless signal of N.Power. Please see the diagram below:
WDS Repeater in AP Mode
The WDS Repeater function in AP mode is to extend the wireless signal of remote AP.
Please see the diagram below for details:
For information on how to configuration WDS Repeater, please go to section 4.4.10 or
section 6.2.9.
Both sides must support WDS
5
1. Introduction
In
AirLive N.Power User's Manual