Client Mode - Ovislink N.Power User Manual

3.7.2 Client Mode

Example 1: Using WPS hardware button
Please push WPS button directly on the back of the device. The "WPS" LED flash will light
and the N.Power will start to survey the AP's WPS signal in the current environment.
Within two minutes, please push WPS button on your AP device, the connection will
automatic successfully.
Example 2: WPS using PIN
Please login N.Power's Web UI. Select Wireless Setting
Client WPS Setting.
Select the SSID that you want to connect. Choose WPS mode to "Enrollee" and get a PIN
Code in the field. Then press "PIN Start" and the "WPS" LED flash will light two minutes
on the device's housing.
1
2
21
3. Configuring the N.Power
change to Client mode
3
AirLive N.Power User's Manual