Table of Contents
Advertisement
Fig 1-2: Press and hold the reset button while plugging in the power.
6.
Open a browser; type "192.168.1.254" for the website address. The following screen
should show up
7.
Click the "Browse" button, select and open the correct firmware file.
8.
Click on "UPGRADE" button. Do not touch the AP or PC until the upgrade is
completed.
After upgrading, the configuration will recover from the previous settings. Please
9.
access your device at previous IP address. If you forget what the previous IP
address is or if you can't access the device, please push the reset button for 10
seconds to restore your AP to factory default settings. The system will reboot. Then,
you should be able to login into the normal Web UI at the default IP: 192.168.1.254.
AirLive N.Power User's Manual
9. Emergency Firmware Recovery
80
Advertisement
Table of Contents
