Table of Contents
Advertisement
10
In this chapter, we will address some frequent asked questions about N.Power
I plug my USB Storage into N.Power, but it can not be recognized
Question:
Answer:
1.
Please make sure you have plugged the USB storage in the right direction.
2.
Please make sure your USB storage is using FAT or FAT32 format. NTFS is not
supported
3.
If your are using a USB hard drive, you need to connect the external power adapter.
===================================================================
After Emergency Upgrade, I can't find my N.Power at 192.168.1.254
Question:
The N.Power will restore to the previous settings after successful Emergency
Answer:
upgrade. Therefore, the IP address will change to the previous IP address.
If you still can't find N.Power in previous address, please do a restore to
default and the N.Power should appear at 192.168.1.254
====================================================================
When I wan to use "Site Survey" tool to connect with a AP that has no
Question:
encryption, why does the N.Power report "encryption type mismatch!" and ask
me to configure the wireless security settings?
When you press "Connect" from site survey, the N.Power will first check if the
Answer:
current wireless encryption setting is correct. If not, it will ask you to modify
the setting. Therefore, if your current wireless settings has encryption and
the new AP you want to associate does not use encryption, and then the
N.Power will report the mismatch. In this case, simple select "Disable" in the
encryption field and press "Apply Change".
====================================================================
When I change my wireless operation mode, why can't I find my AP anymore?
Question:
By Default, the DHCP server is turned on in Router mode. In other modes,
Answer:
Frequent Asked
10.
Questions
81
10. Frequent Asked Questions
AirLive N.Power User's Manual
Advertisement
Table of Contents
