4.4.10 WDS Settings (Repeater)
This is known as WDS Repeater function. Enable this setting to allow remote WDS
equipped AP to extend the wireless signal of N.Power. Up to 4 WDS repeaters can be
connect with N.Power. WDS works by entering the wireless MAC addresses (also known
as BSSID) of remote Access Points.
Encryp Type: You can use one of the following 4 encryption type.
None: No encryption is made. This is not recommended as it posts serious
security issue.
WEP: This is the most compatible type. However, it is also easier for
hackers to break. Use this only if AES or TKIP doesn't work.
TKIP: Temporal Key Integrity Protocol, TKIP is more secured than WEP but
less secure than AES.
43
4. Configuration: Router Mode
AirLive N.Power User's Manual