Wan Setting - Ovislink N.Power User Manual

Step 5: Please click "Finish" to reboot the system if you are sure about all settings.

4.2.2 WAN Setting

Internet Settings -> WAN Settings
WAN Connection Type: Choose your ISP connection Type. If you are using ADSL
connection, the most likely connection type is PPPoE. If you are using Cable Modem,
the most likely connection type is DHCP. However, please consult with your ISP
about the correct setting first.
TTL: Time to Live is a 8-bit value in the IP header. Your ISP might require to set this
value to work. Please consult with your ISP settings to check if setting the TTL is
required. In most cases, it is not. If it is required, please enable TTL then enter the
value in the below field.
25
4. Configuration: Router Mode
AirLive N.Power User's Manual