5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product MIMO 802.11g Wireless Broadband Router AirLive WMM-3000R is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);...
Page 3
Directiva 1999/5/CE. disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive WMM-3000R v Ελληνική [Greek] ΟΤΙ AirLive WMM-3000R ΣΥΜΜΟΡΦΩΝΕΤΑΙ Slovensko skladu z bistvenimi zahtevami in ostalimi relevantnimi ΠΡΟΣ...
CE Declaration of Conformity This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B. The specification is subject to change without notice. AirLive WMM-3000R User’s Manual...
4.6.4 MAC Address Control ........................44 4.6.5 Miscellaneous Items ........................47 ..........................48 4.7 A DVANCED ETTINGS 4.7.1 System Time ............................ 49 4.7.2 System Log ............................50 4.7.3 Dynamic DNS ..........................51 4.7.4 SNMP Setting ..........................52 AirLive WMM-3000R User’s Manual...
Page 6
4.8.7 Miscellaneous Items ........................61 APPENDIX A TCP/IP CONFIGURATION FOR WINDOWS 95/98 ............63 APPENDIX B 802.1X SETTING ......................68 APPENDIX C WPA-PSK AND WPA ....................... 73 APPENDIX D WDS SETTING ......................... 84 APPENDIX E FAQ AND TROUBLESHOOTING ................... 87 AirLive WMM-3000R User’s Manual...
Lets a networked computer be fully exposed to the Internet; this function is used when special application sensing tunnel feature is insufficient to allow an application to function correctly. Statistics of WAN Supported Enables you to monitor inbound and outbound packets AirLive WMM-3000R User’s Manual...
Page 8
When SPI Mode is enabled, the router will check every incoming packet to detect if this packet is valid. DoS Attack Detection Supported When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. AirLive WMM-3000R User’s Manual...
UPNP (Universal Plug and Play)Supported The router also supports this function. The applications: X-box, Msn Messenger. 1-2 Packing List Wireless broadband router unit Installation CD-ROM Power adapter CAT-5 UTP Fast Ethernet cable AirLive WMM-3000R User’s Manual...
Figure 2-1 Front Panel LED: Ports: Port Description Power inlet the port where you will connect your cable (or DSL) modem or Ethernet router. Port 1-4 the ports where you will connect networked computers and other devices. AirLive WMM-3000R User’s Manual...
Link status Green LAN port. The corresponding LAN port is sending or receiving Blinking Speed data. 10/100 Data Rate Green Data is transmitting in 100Mbps on the corresponding LAN port. Reset To reset system settings to factory defaults AirLive WMM-3000R User’s Manual...
ON for about 10 seconds, and then M1 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that this product is in normal operation. AirLive WMM-3000R User’s Manual...
Tip: The LAN LED of this product and the link LED of network card on your computer must be lighted. Is the TCP/IP environment of your computers properly configured? Tip: If the IP address of this product is 192.168.1.254, the IP address of your computer must be 192.168.1.X and default gateway must be 192.168.1.254. AirLive WMM-3000R User’s Manual...
Chapter 4 Configuring Wireless Broadband Router This product provides Web based configuration scheme, that is, configuring by your Web browser, such as Netscape Communicator or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. AirLive WMM-3000R User’s Manual...
After the connection is established, you will see the web user interface of this product. There are two appearances of web user interface: for general users and for system administrator. A window would pop-up asking for Login and Password. Please enter “admin” for login, and “airlive” for password.
If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. B. Statistics of WAN: enables you to monitor inbound and outbound packets AirLive WMM-3000R User’s Manual...
4.3 Wizard ”Next >” Setup Wizard will guide you through a basic configuration procedure step by step.Press Setup Wizard - Select WAN Type: For detail settings, please refer to 4.4.1 primary setup. AirLive WMM-3000R User’s Manual...
Page 19
4.4.1.3 Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond) LAN IP Address is the IP address of this product. It must be the default gateway of your AirLive WMM-3000R User’s Manual...
Page 20
First,Please check your ISP assigned and Select Static IP Address or Dynamic IP Address. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you. Server IP Address: the IP address of the PPTP server. AirLive WMM-3000R User’s Manual...
Page 21
ISP when the clients send outgoing packets. Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established. Manually:The device will not make the link until someone clicks the connect-button in the Staus-page. AirLive WMM-3000R User’s Manual...
Page 22
ISP when the clients send outgoing packets. Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established. Manually:The device will not make the link until someone clicks the connect-button in the Staus-page. AirLive WMM-3000R User’s Manual...
The settings of a TCP/IP environment include host IP, Subnet Mask, Gateway, and DNS configurations. It is not easy to manually configure all the computers and devices in your network. Fortunately, DHCP Server provides a rather simple approach to handle all these settings. This product supports the AirLive WMM-3000R User’s Manual...
Gateway: The Gateway Address would be the IP address of an alternate Gateway. This function enables you to assign another gateway to your PC, when DHCP server offers an IP to your PC. 4.4.3 Wireless Setting, 802.1X setting and WDS AirLive WMM-3000R User’s Manual...
Page 26
Wireless user must authenticate to this router first to use the Network service. RADIUS Server IP address or the 802.1X server’s domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WMM-3000R User’s Manual...
Page 27
1. Select Encryntion and Preshare Key Mode If you select HEX,you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII,the length of preshare key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WMM-3000R User’s Manual...
Page 28
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WMM-3000R User’s Manual...
Page 29
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WMM-3000R User’s Manual...
Page 30
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WMM-3000R User’s Manual...
Page 31
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WMM-3000R User’s Manual...
Page 32
WDS operation as defined bythe IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. AirLive WMM-3000R User’s Manual...
A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Server can work with Scheduling Rules, and give user more flexibility on Access control. For Detail, please refer to Scheduling Rule. AirLive WMM-3000R User’s Manual...
Page 34
For example, if you have an FTP server (port 21) at 192.168.1.1, a Web server (port 80) at 192.168.1.2, and a VPN server at 192.168.1.6, then you need to specify the following virtual server mapping table: Service Port Server IP Enable 192.168.1.1 192.168.1.2 1723 192.168.1.6 AirLive WMM-3000R User’s Manual...
This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list. Note! At any given time, only one PC can use each Special Application tunnel. AirLive WMM-3000R User’s Manual...
You have to configure this item if you want to access an FTP server whose port number is not 21. This setting will be lost after rebooting. UpnP Setting The device also supports this function.If the OS supports this function enable it,like Windows Xp.When the user get ip from Device and will see icon as below: AirLive WMM-3000R User’s Manual...
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the following: Source IP address Source port address Destination IP address Destination port address Protocol: TCP or UDP or both. Use Rule# AirLive WMM-3000R User’s Manual...
Page 39
To enable Inbound Packet Filter click the check box next to Enable in the Inbound Packet Filter field. Suppose you have SMTP Server (25), POP Server (110), Web Server (80), FTP Server (21), and News Server (119) defined in Virtual Server or DMZ Host. Example 1: AirLive WMM-3000R User’s Manual...
Page 40
Example 2: (1.2.3.100-1.2.3.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: AirLive WMM-3000R User’s Manual...
Page 41
(192.168.1.100-192.168.1.149) They are allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168.1.10-192.168.1.20) They can do everything (block nothing) Others are all blocked. AirLive WMM-3000R User’s Manual...
Page 42
Example 2: (192.168.1.100-192.168.1.119) They can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. AirLive WMM-3000R User’s Manual...
A suffix of URL to be restricted. For example, ".com", "xxx.com". Action When someone is accessing the URL met the domain-suffix, what kind of action you want. Check drop to block the access. Check log to log these access. Enable Check to enable each rule. AirLive WMM-3000R User’s Manual...
Page 44
2. URL include “www.sina.com” will not be blocked, but the action will be record in log-file. 3. URL include “www.google.com” will be blocked, but the action will not be record in log-file. IP address X.X.X.1~ X.X.X.20 can access network without restriction. AirLive WMM-3000R User’s Manual...
If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex". Enable Checked to enable each rule. AirLive WMM-3000R User’s Manual...
Page 46
2. URL include “sina” will be blocked, but the action will be record in log-file 3. URL include “cnnsi” will not be blocked, but the action will be record in log-file. 4. URL include “espn” will be blocked, but the action will be record in log-file AirLive WMM-3000R User’s Manual...
LAN, itmeans the client can't send or receive any data via this device. Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control table", to associate to the wireless LAN. AirLive WMM-3000R User’s Manual...
Page 48
MAC address of the client you select to the ID selected in the “ID” Combobox. Previous page and Next Page To make this setup page simple and clear, we have divided the “Control table” into several pages. You can use these buttons to navigate to different pages. AirLive WMM-3000R User’s Manual...
Page 49
If, for example, client 3 tries to use an IP address different from the address listed in the Control table (192.168.1.101), it will be denied to connect to this device. 5.Clients 2 and 3 and other wired clients with a MAC address unspecified in the Control table are all AirLive WMM-3000R User’s Manual...
When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. Currently, the router can detect the following DoS attack: SYN Attack, WinNuke, Port Scan, Ping of Death, Land Attack etc. AirLive WMM-3000R User’s Manual...
Selected if you want to Set Date and Time manually. Set Date and Time manually Selected if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time server Daylight Saving:Set up where the location is. AirLive WMM-3000R User’s Manual...
25. For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to The recipients who will receive these logs. You can assign more than 1 recipient, using ';' or ',' to separate these email addresses. AirLive WMM-3000R User’s Manual...
Next you can enter the appropriate information about your Dynamic DNS Server. You have to define: Provider Host Name Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS server. Example: AirLive WMM-3000R User’s Manual...
You must check either Local or Remote or both to enable SNMP function. If Local is checked, this device will response request from LAN. If Remote is checked, this device will response request from WAN. Get Community Setting the community of GetRequest your device will response. AirLive WMM-3000R User’s Manual...
Static Routing: For static routing, you can specify up to 8 routing rules. You can enter the destination IP address, subnet mask, gateway, hop for each routing rule, and then enable or disable the rule by checking or unchecking the Enable checkbox. AirLive WMM-3000R User’s Manual...
Page 57
192.168.1.103 (a gateway), And if it sends Packets to 192.168.1.11 will go via 192.168.1.216 Each rule can be enabled or disabled individually. After routing table setting is configured, click the save button. AirLive WMM-3000R User’s Manual...
Page 58
Press “Add New Rule” You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 14:10 to 16:20 AirLive WMM-3000R User’s Manual...
Page 59
To delete the schedule rule, and the rule# of the rules behind the deleted one will decrease one automatically. Schedule Rule can be apply to Virtual server and Packet Filter, for example: Exanple1: Virtual Server – Apply Rule#1 (ftp time: everyday 14:10 to 16:20) AirLive WMM-3000R User’s Manual...
4.8 Maintenance 4.8.1 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. AirLive WMM-3000R User’s Manual...
You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. AirLive WMM-3000R User’s Manual...
4.8.5 Reset to default You can also reset this product to factory default by clicking the Reset to default button. 4.8.6 Reboot You can also reboot this product by clicking the Reboot button. 4.8.7 Miscellaneous Items AirLive WMM-3000R User’s Manual...
Page 65
Domain Name or IP Address for Ping Test Allow you to configure an IP, and ping the device. You can ping a secific IP to test whether it is alive. AirLive WMM-3000R User’s Manual...
3. Click Add button to add network component into your PC. 4. Double click Protocol to add TCP/IP protocol. 5. Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window. AirLive WMM-3000R User’s Manual...
Page 67
2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window. 3. Click Properties button to set the TCP/IP protocol for this NAT Router. 4. Now, you have two setting methods: AirLive WMM-3000R User’s Manual...
Page 68
Select Obtain an IP address automatically in the IP Address tab. Don’t input any value in the Gateway tab. AirLive WMM-3000R User’s Manual...
Page 69
Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.168.1.254. So please use 192.168.1.xxx (xxx is between 1 and 253) for IP Address field and 255.255.255.0 for Subnet Mask field. AirLive WMM-3000R User’s Manual...
Page 70
In the Gateway tab, add the IP address of this product (default IP is 192.168.1.254) in the New gateway field and click Add button. c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click Add button. AirLive WMM-3000R User’s Manual...
Note. Windows 2000 RADIUS server only supports PEAP after upgrade to service pack 3 and HotFix Q313664 (You can get more information from http://support.microsoft.com/default.aspx?scid=kb; en-us;313664) 2 DUT Configuration: 1.Enable DHCP server. 2.WAN setting: static IP address. 3.LAN IP address: 192.168.1.254/24. 4.Set RADIUS server IP. AirLive WMM-3000R User’s Manual...
Page 72
3.If choosing use smart card or the certificate as the EAP type, we select to use a certificate on this computer. (Fig 3) 4. We will change EAP type to fit the variable test condition. AirLive WMM-3000R User’s Manual...
Page 73
5. The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC1. (Fig 5) 6. Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. ( Fig 6) AirLive WMM-3000R User’s Manual...
Page 74
7. Terminate the test steps when PC1 get dynamic IP and PING remote host successfully. Figure 4: Certificate information on PC1 Figure 5: Authenticating AirLive WMM-3000R User’s Manual...
Page 75
2.PC2 is on Windows XP platform with Service Pack 1a. 3.PEAP is supported on Windows XP with Service Pack 1 only. 4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enable. AirLive WMM-3000R User’s Manual...
Appendix C WPA-PSK and WPA Wireless Router: LAN IP: 192.168.1.254 WAN IP: 192.168.122.216 Radius Server: 192.168.122.1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www.funk.com Download: http://www.funk.com/News&Events/ody_c_wpa_preview_pn.asp Or Another Configuration: PA-PSK AirLive WMM-3000R User’s Manual...
Page 77
1. Go to the Web manager of Wireless Router to configure, like below: 2. Go to Odyssey Client Manager, first choose “Network” Before doing that, you should verify if the software can show the wireless card. Open “Adapters” 3. Add and edit some settings: AirLive WMM-3000R User’s Manual...
Page 78
4. Back to Connection: Then Select “Connect to network” You will see: Method2: 1. First, patch windows XP and have to install “Service package 1” AirLive WMM-3000R User’s Manual...
Page 79
Patch: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=5039ef4a-61e0-4c44- 94f0-c25c9de0ace9 2. Then reboot. 3. Setting on the router and client: Router: Client: Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: Advanced choose “123kk” AirLive WMM-3000R User’s Manual...
Page 80
1. The UserA or UserB have to get certificate from Radius, first. http://192.168.122.1/certsrv account : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wireless Router to configure, like below: AirLive WMM-3000R User’s Manual...
Page 81
4. Go to Odyssey Client Manager, choose “Profiles” and Setup Profile name as “1” Login name and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. AirLive WMM-3000R User’s Manual...
Page 82
5. Then Choose “certificate” like above. 6. Then go to Authentication and first Remove EAP/ TLS and Add EAP/TLS again. AirLive WMM-3000R User’s Manual...
Page 83
7. Go “Network” and Select “1” and ok 8. Back to Connection and Select “123kk. If successfully, the wireless client has to authenticate with Radius Server, like below: AirLive WMM-3000R User’s Manual...
Page 84
9.Result: Method 2: 1. The UserA or UserB have to get certificate from Radius,first. http://192.168.122.1/certsrv account:fae1 passwd:fae1 AirLive WMM-3000R User’s Manual...
Page 85
3. Setting on the router and client: Router: Client: Go to “Network Connection” and select wireless adapter. Choose “View available Wireless Networks” like below: Advanced choose “123kk” Select “WirelessCA and Enable” in Trusted root certificate authority: AirLive WMM-3000R User’s Manual...
Page 86
Then, if the wireless client wants to associate, it has to request to authenticate. AirLive WMM-3000R User’s Manual...
–a. There are some information in the screen. For example: AP 1: AP2: AP3: IP:192.168.1.254 IP:192.168.1.253 IP:192.168.1.252 Mac:00-50-18-00-0f-fe Mac:00-50-18-00-0f-fd Mac:00-50-18-00-0f-fc SSID:Default SSID:Default SSID:Default Channel:11 Channel:11 Channel:11 Dhcp Server:Enable Blue Line:Wireless Black Line:Wire AirLive WMM-3000R User’s Manual...
Page 88
If the Settings are ok,the client1 and client2 can get ip from dhcp server of AP1.Then Client1 and Client2 can get information each other. AP1 Setting: AP1 AP2(Remote Mac: 00-50-18-00-0f-fd) AP1 AP3(Remote Mac: 00-50-18-00-0f-fc) AirLive WMM-3000R User’s Manual...
Then, please check if the Pc gets ip address from Router. Use command mode as below: If yes, please execute Browser, like Mozilla and key 192.168.1.254 in address. If not, please ipconfig /release, then ipconfig /renew. AirLive WMM-3000R User’s Manual...
Page 91
Status led flashes irregularly: Maybe the root cause is Flash rom and please press reset Button to reset to default or try to use Recovery mode.(Refer to Q3 and Q4) Status flashes very fast while powering on: Maybe the router is the recovery mode and please refer to Q4. AirLive WMM-3000R User’s Manual...
Page 92
IP address. The Subnet mask must be 255.255.255.0, and the Default gateway must be 192.168.1.254. Then click “OK” button to complete TCP/IP setup. Step2: Open the command mode and input “cmd” then check if the router replies to ping 192.168.1.254 AirLive WMM-3000R User’s Manual...
Page 93
Lan port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the isp. Then please go to this page to input the information isp is assigned. AirLive WMM-3000R User’s Manual...
Page 94
But I can not access the site that inputs domain name, for example http://espn.com A: Please check the dns configuration of Static IP Address. Please refer to the information of ISP and assign one or two in dns item. AirLive WMM-3000R User’s Manual...
Page 95
Then click and will see the ap list that wireless client can be accessed: If the client can not access your wireless router, please refresh network list again. However, I still can not fine the device which ssid is “default”, please refer to Q3. AirLive WMM-3000R User’s Manual...
Page 96
2.When I use AES encryption of WPA-PSK to connect even if I input the correct pre-share key? A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: AirLive WMM-3000R User’s Manual...
Page 97
3.When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify What the problem is. AirLive WMM-3000R User’s Manual...