Wps Settings - Ovislink N.Power User Manual

Channel Width: You can choose 20MHz or 20/40MHz channel width. Choose
20MHz for compliance with laws in some countries. 40MHz offers faster performance
than 20MHz
Guard Interval: Guard interval is placed at the beginning of each transmission. It is
used to reduce the interference effect of multi-path transmissions. The use of long
Guard Interval may perform better in interference or multipath environment. However,
it can reduce the performance.
MCS (Modulation and Code Scheme): MCS level for the 11n mode. It is
recommended to leave it at Auto.

7.2.5 WPS Settings

Example 1: Using WPS hardware button
Please push WPS button directly on the back of the device. The "WPS" LED flash will light
and the N.Power will start to survey the AP's WPS signal in the current environment.
Within two minutes, please push WPS button on your AP device, the connection will
automatic successfully.
Example 2: WPS using PIN
Please login N.Power's Web UI. Select Wireless Setting
Client WPS Setting.
change to Client mode
71
7. Client Mode
AirLive N.Power User's Manual