Wds Settings (Repeater) - Ovislink N.Power User Manual

6.2.9 WDS Settings (Repeater)

This is known as WDS Repeater function. In AP mode, the N.Power will repeat the
wireless signal of remote AP/Router. Up to 4 WDS repeaters can be connect with
N.Power. WDS works by entering the wireless MAC addresses (also known as BSSID) of
remote Access Points.
EncrypType: You can use one of the following 4 encryption type.
None: No encryption is made. This is not recommended as it posts serious
security issue.
WEP: This is the most compatible type. However, it is also easier for
hackers to break. Use this only if AES or TKIP doesn't work.
AirLive N.Power User's Manual
64
6. AP Mode