Catv Dynamic Mode - Ovislink Wireless Router User Manual

Static configuration

CATV dynamic Mode

Selecting this mode enables you to obtain dynamic IP address from your ISP via DHCP
support. Once the IP address is obtained, you can access the Internet.
For most cases, this page needs no input. However, some ISPs may require some
information for identification purpose. For example: Device/Computer name and
Domain Name; please enter the information required to complete the settings.
Figure 5
Device Information
Adapter Address
Device/Computer
Name
OvisLink
This field is grayed out, because the Adapter Address is
not supposed to be entered randomly. Do Not alter the
content unless you are sure it is necessary to modify your
MAC address (refer to FAQ in the later chapter for more
information about the condition that requires modifying the
MAC address). To modify the address; check
and enter the desired MAC address.
Enter a descriptive name for identification purpose. Some
Internet Service Providers (ISP) requires this information
- 7
installing the device, do not run
PPPoE software on your computers.
Select this item when the ISP assigns
static IP address for your account.
Check to modify the
MAC address
necessary.
?
Modify
when