Load The Printing Paper; Loading The Paper; Turn On The Power And Load The Memory Card; Turning On The Printer Power - FujiFilm Printpix CX-400 Owner's Manual

1 Try to print!

LOAD THE PRINTING PAPER

Place the roll type paper onto the paper holder before loading the paper into the printer.
The printer automatically recognizes the type of paper.

Loading the paper

1
Open the paper compartment cover.
Press the [OPEN] button at the upper right-hand
side of the printer.
Note
• Do not turn on the printer power yet.
2
Separate the paper holder to two parts, white
and black.
Note
• Do not turn on the printer power yet.
3
Remove the printing paper from the moisture-
proof bag and insert the paper holders.
q Insert the white paper holder into the white end of
the paper core.
w Insert the black paper holder into the black end of
the paper core.
Note
• Do not peel the paper holding sticker from the paper yet.
4
Grasp the paper holder knob and place the
paper holder into the printer.
Insert the paper holder into the printer from the
top and pull it gently to the front.
Note
• Do not peel the paper holding sticker from the paper yet.
5
Peel the paper holding sticker from the paper
and adjust the paper position.
Turn the paper in the arrow direction, and align
the top edge of the paper to the paper alignment
position.
After loading the paper, close the paper
compartment cover.
12
White Black
q w
Paper holding sticker
White Black
1 Try to print!

TURN ON THE POWER AND LOAD THE MEMORY CARD

Insert the memory card after turning on the printer power. The CX-400 can print the data of
SmartMedia and PC card. Insert the memory card to be used.

Turning on the printer power

1
Press the [POWER] button at the bottom front
left-hand corner of the printer.
The printer power comes on and a window
appears on the LCD monitor screen.
Note
• Do not disconnect the power cord or remove the memory
card during printing.

Loading SmartMedia

TM
Usable SmartMedia
Capacity: 2 MB, 4 MB, 8 MB, 16 MB, 32 MB,
64 MB, 128 MB
Voltage: 3.3 V
• The printer will not allow 5 V SmartMedia cards to be inserted
into the SmartMedia slot. Use a PC card adapter.
• Use a digital camera to format the SmartMedia.
1
Select [SmartMedia] by sliding the card select
lever at the front center of the printer to the right.
Note
• SmartMedia and PC card cannot be loaded into the printer at
the same time
2
Insert the SmartMedia into the SmartMedia slot
with the power supply section (gold-colored area)
upwards and push it in until it clicks.
Note
• Do not touch the power supply section (gold-colored area) of
the SmartMedia card.
T I P
• When the [BUSY] lamp is
off, the memory card can be
removed at any time.
13