Safety Notes - FujiFilm Printpix CX-400 Owner's Manual

G Kinds of printing
The following printings can be enjoyed with this printer.
Check page 101 for the print size.
Full Print
Prints full print (one picture on one sheet of
printing paper). This is the most basic printing
method. The picture to be printed can be
specified, or all the pictures on the memory card
can be printed.
➔P. 27
Index Print
Prints the pictures of 25 frames on one sheet of
paper. This is very convenient when checking
the pictures on the memory card.
➔P. 30
ID Print
Prints up to 24 frames of the picture of the
chosen size on one sheet of paper.
➔P. 34
DPOF Print
Prints according to the DPOF information on the
memory card.
➔P. 15
Print with border can also be selected.
Printing of border and border less prints can be
enjoyed by selecting this setting at printing.
➔P. 39
➔P. 22
Multiple Print
Prints the desired number of frames (2UP, 4UP,
9UP, 16UP, 25UP) on one sheet of paper. The
positions of the pictures to be printed can be
specified in the multiple frame.
✽ The specifiable number of frames varies
depending on the print size.
Finish Photo/
Manual Adjustment Print ➔P. 35
Photo finishing can be enjoyed by using such
functions as "ZOOM/MOVE" that magnifies the
picture, "ROTATION" that changes the vertical
and horizontal direction of the picture, and
"EFFECT" that produces a sepia or monochrome
picture.

SAFETY NOTES

Thank you for purchasing this FUJIFILM product. Before using your new product, thoroughly read the "Owner's
Manual" and use the product correctly. After reading the "Owner's Manual" store it in a safe place.
The warning types explained below indicate the severity of the injury or damage
that can result if a warning is ignored or the product is used incorrectly.
Indicates that the subject of this
WARNING warning may cause death or
serious injury.
The icons shown below indicate the type of warning to be observed.
Triangular icons notify Circular icons with a
the user that care is diagonal bar notify the
required. user that the action
indicated is prohibited.
WARNING
Do not use this product if the power cable is not
plugged incorrectly.
Do not damage or modify the power cord.
Do not bend, twist or pull the power cord excessively.
Do not place heavy objects on the power cord or lay the power
cord under objects with corners.
Do not place the power cord near heating appliances or expose
the power cord to heat.
A short-circuit or heat discharge can cause an electric shock or fire.
Do not place the printer in an unstable location.
If the printer looses its balance and tips over or falls, it could
cause injury.
Do not use voltages other than the specified power
supply voltage.
This can cause a fire or electric shock.
Never attempt to disassemble or modify the printer
(remove the casing, etc.).
Do not use the printer when it has been dropped or the
casing is damaged.
This can cause fire or electric shock.
G Contact your FUJIFILM dealer or authorized FUJIFILM service
facility.
CAUTION
Do not place the printer in location where oily smoke,
steam, moisture, or dust is prevalent.
This could cause a fire or electric shock.
Keep out of the reach of small children.
Small children may stick their hand into the printer (paper
compartment cover, trash box slot, etc.) and be injured.
Indicates that the subject of this
CAUTION warning may cause personal
injury or material damage.
Filled circles with an
exclamation mark notify
the user that an action
must be performed.
Do not place metal objects or receptacles containing
liquids on or near the printer.
Do not let water or foreign objects enter the printer.
If water or foreign objects enters the printer, turn off the power
Do not get wet.
switch and unplug the power cable from the power outlet.
Continued use of the printer in these circumstances can result in
short-circuit and cause a fire or electric short.
G Contact your FUJIFILM dealer or authorized FUJIFILM service
facility.
If an abnormality occurs, turn off the power switch and
unplug it from the power outlet.
Continued use when smoke or abnormal odor emanates from
the printer can cause a fire or electric shock.
Unplug from the
G Contact your FUJIFILM dealer or authorized FUJIFILM service
power outlet.
facility.
Do not plug in or unplug the printer with wet hands.
This can cause electric shock.
Wet hands
prohibited.
Do not block the ventilation slits.
Any blockage of the ventilation slits during use could result in a
buildup of heat inside the printer, causing a fire or other
damaged.
I Never do the following:
G Push the printer into a place that is narrow and poorly
ventilated.
G Use the printer on a carpet or blanket.
Do not place heavy objects on the printer.
The object or the printer could loose its balance and tip over or
fall, causing injury.
1