Loading Paper - FujiFilm ApeosPro C810 User Manual

Loading Paper

Important
Do not place paper or other objects in the reserved
■
space of the tray. It may cause paper jams or ma-
chine malfunction.
While the printer is processing a job, do not remove
■
the Paper Tray used for the job.
Note
Before loading the paper into the Paper Tray, fan a
stack of paper well. This will separate the sheets,
and it can prevent paper jamming.
This section explains how to load the plain paper into the
tray 1 to 4.
Loadable Paper
Paper size (mm) Tray 1, 2
Width: 100 to 330
Length: 148 to 488
Tray 3, 4
Standard size:
Max: A4 /Letter
Min: JIS B5
Paper weight (g/m ) 52 to 300
2
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray,
take out the paper.
3.
When loading paper whose size is JIS
B4 or larger, pinch the knob and lift the
paper rear end guide, and set the guide
into the hole for the indicated size.
2
1
3
4.
Pinch the guide clip(s) and adjust to the
correct paper size.
There are two guide clips on the tray 1 and 2 and one
guide clip on the tray 3 and 4.
5.
Fan a stack of paper, face the print sur-
face down, and then load the paper with
edges aligned according to the direction
of the arrow.
Important
Do not load paper above the maximum fill line. It
may cause paper jams or machine malfunction.
Note
Adjust the guide clip(s) correctly to the size of paper.
If the guide clip(s) is not adjusted correctly, the
machine cannot feed the paper properly, resulting in
paper jams.
6.
Push in the Paper Tray.
7.
When you have changed the paper type,
set the Paper Tray on the Device screen.
1.
Tap on > [Device] > [Paper Tray Set-
tings].
2.
After tapping on the number for the Paper
Tray you have loaded the paper, configure
the paper items, and then tap on [OK].
8.
When printing, configure the paper set-
tings from the printer driver.
3