Table of Contents
Advertisement
4
When trouble occurs
WHEN DATA IS DISPLAYED ON THE LCD MONITOR
See when a window with
or the "Select item" window was displayed.
Symptom
Cause
Paper was cut because printing was
interrupted.
Printer is warming up or overheated.
Memory card is not inserted.
Paper compartment cover is open.
Paper trash box is not installed.
—
Paper compartment cover is open.
48
Remedy
Wait a while and operation will advance to
the next window.
Wait a while.
Insert a memory card.
Close the paper compartment cover.
Install the trash box.
Put in the Cleaning paper and Cleaning
paper core.
Close the paper compartment cover.
Symptom
Cause
Since an attempt was made to change the
print mode, the previously quantity and edit
settings are canceled.
An attempt was made to select a print
size that cannot be selected with this
number of divisions.
An attempt was made to select a number
of divisions that cannot be selected with
this print size.
There is a editing set frame. The problem
is whether or not finish setting remains
when printing after the end of printing.
Clear the quantity of prints setting.
When picture turn is performed after zoom
setting, zoom setting is formatted.
When trouble occurs
4
Remedy
To perform the print mode change, select
"YES" and press the [SET] button. To cancel
the print mode change, select "NO" and
press the [SET] button.
Change the number of divisions and select
change print size or cancel print size change
and press the [SET] button.
Change the print size and select change
number of divisions or cancel number of
divisions change and press the [SET] button.
When you want to start a new printing without
edit setting remaining, select "YES". When
you want to continue printing with edit setting
remaining, select "NO".
When you want to turn the picture even
though zoom setting was formatted, select
"YES" and press the [SET] button. When you
do not want to format the zoom setting, select
"NO" and press the [SET] button.
When "ROTATION" is performed after
"ZOOM/MOVE", the "ZOOM/MOVE" settings
are canceled. When performing both
"ZOOM/MOVE" and "ROTATION" photo
finishing, perform them in "ROTATION" →
"ZOOM/MOVE" order.
49
Advertisement
Table of Contents
