Table of Contents
Advertisement
1
Try to print!
AT THE END OF PRINTING
Removing and storing the printing paper.
Removing the memory card
1
Press the [EJECT] button and remove the
memory card.
Note
• Do not remove the memory card while the [BUSY] lamp is lit
or blinking.
• Do not touch the power supply section (gold colored area) of
the SmartMedia card.
• When using a PC card adapter, always remove it by pressing
the [EJECT] button. (Do not remove only the memory card in
the PC card adapter.)
Turning off the printer power
1
Press the [POWER] button at the front bottom
left-hand corner of the printer.
The LCD monitor and the printer power are
turned off.
Note
• When the printer power is off and when the memory card is
removed, the quantity and edit settings are cleared.
Removing and storing the paper
Remove the paper from the printer and store it in the paper case.
When the paper is not in use, always store it in the paper case.
1
Press the [OPEN] button at the top right-hand
side of the printer.
Open the paper compartment cover.
2
Installing the retaining ring to the paper.
Install the retaining ring by pressing it firmly onto
the paper so that it will not become detached.
Note
• Always use the retaining ring to prevent the paper from
becoming loose. If the retaining ring is not used, the paper
will come loose and cause jamming the next time the printer
is used.
• Do not remove the paper holder yet.
16
Retaining ring
Retaining ring
3
Grasp the paper holder knobs with both hands
and remove the holder from the printer.
Remove the paper holder after gently pushing it
to the back.
Note
• Be sure the retaining ring does not become detached from
the paper.
4
Remove the printing paper from the paper
holders.
q Remove the black paper holder.
w Remove the white paper holder.
Note
• Be sure the retaining ring does not become detached from
the paper.
5
Store the paper in the paper case.
Completely close the cover of the paper case
until it clicks and store it in a cool, dark place.
Note
• Be sure that the paper retaining ring is installed.
• After use, always place the paper into the paper case.
• After using the printer, always place the paper into the paper
case and store it while avoiding the following locations:
- Where it is dry, where the humidity is high, or where it is
dusty.
- In a vehicle in the summer, near heating equipment, and
other places where the temperature is high.
- Near a window or other places where the paper will be
exposed to direct sunlight or strong light.
• Paper with the protective bag sealed cannot be stored for a
long time. Use it as quickly as possible.
• Do not use paper whose effective date is expired.
After removing the paper, close the printer paper
compartment cover.
6
From the second printing, remove the retaining ring after loading the paper into the
printer.
This completes the basic operation.
To enjoy various printing, refer to page 18 to 39.
Try to print!
T I P
• Leave the paper holder in
White
Black
the printer in preparation for
the next use.
w
q
T I P
• Empty the scraps in the trash
box in preparation for the
next use.
click
✽ Close the cover of the
paper case completely.
• How to open
Open while pressing the
bottom of the case with
your finger.
17
1
Advertisement
Table of Contents
