Multiple Print; Setting Multiple Print; Multiple Print (Same Picture) - FujiFilm Printpix CX-400 Owner's Manual

Digital photo printer
Table of Contents

Advertisement

2
Enjoy various printing!

MULTIPLE PRINT

Multiple print prints the preferred number of frames (2UP, 4UP, 9UP, 16UP, 25UP) on one sheet of
paper. When the print size is [3" × 4" Size], only 2UP and 4UP multiple printing are possible.

Setting multiple print

1
Load the paper and memory card into the
printer, and press the [CUSTOM] button at the
top of the printer.
Use ab to select "MULTIPLE", and press the
[SET] button.
2
Use ab to select "DIVISION", and press the
[SET] button.
Note
• "BORDER" cannot be set in the multiple print mode. Pictures
are printed with a border.
3
Use a b to select the preferred number of
frames, and press the [SET] button.
Note
• At this time, the number of frames cannot be selected for
.
4
Use ab to select "PICTURE", and press the
[SET] button.
5
Use ab to select the preferred picture layout,
and press the [SET] button.
The following steps vary depending on the picture
arrangement type. See the next page.
22
Select
e e e
MULTIPLE PRINT (➔P. 22) continued
Select
Select
The following steps vary depending on the picture
arrangement type.
SAME: Prints the same picture at all frames (Page 23).
RANDOM (EACH FRAME):
Sequentially prints the pictures beginning from the top left (Page 24).
RANDOM (LAYOUT): Selects and prints the picture for each frame (Page 25).
RANDOM (ALL FRAMES):
Sequentially prints all the pictures on the memory card beginning from the top left (Page 26).

Multiple print (same picture)

6
At the "SETTINGS FOR MULTIPLE" window,
use ab to select "FINISH SETTINGS", and
press the [SET] button.
The picture is displayed.
Use d c to select the picture to be printed.
7
Use the [QUANTITY] [+] [-] buttons to set the
print quantity.
After setting the print quantity, press the [SET]
button.
8
Press the [PREVIEW] button, and check the
pictures to be printed and the quantity of prints.
9
If the preview contents are correct, press the
[PRINT] button.
The Printing window is displayed and printing is
started. At the end of printing, the paper ejects from
the printer and the monitor returns to the picture
window.
Note
• Do not touch the moving paper while printing.
• Do not remove the memory card while printing.
• Do not pull out the trash box while printing.
• When an error window or information window is displayed,
refer to pages 46 to 50.
Enjoy various printing!
2
T I P
• When the image is 4 frames
or more, and d c is pressed
for 1 second or longer, the
image is quick scrolled.
However, for files other than
Exif (JPEG, TIFF-YC/RGB),
only image type characters
are displayed.
T I P
• To halt printing while printing
multiple prints, press the
[BACK] button.
23

Advertisement

Table of Contents
loading

Table of Contents