All Frames Print; Print Setting; Setting Print Sets - FujiFilm Printpix CX-400 Owner's Manual

2 Enjoy various printing!

ALL FRAMES PRINT

Print setting

1
Load the paper and memory card into the
printer, and press the [CUSTOM] button at the
top of the printer.
2
Use ab to select "FULL", and press the [SET]
button.
3
Use ab to select "FRAME", and press the [SET]
button.
4
Use ab to select "ALL FRAMES", and press the
[SET] button.
5
Use ab to select "FINISH SETTINGS", and
press the [SET] button.
20
Select
Select
Select
Select

Setting print sets

6
The picture (9 frame) is displayed. Use abd c
to select the picture in the memory card.
7
Use the [QUANTITY] [+] [-] buttons to set the
print sets quantity.
After setting the sets quantity, press the [SET]
button.
8
Press the [PRINT] button.
The Printing window is displayed and printing is
started. At the end of printing, the paper ejects from
the printer and the monitor returns to the picture
window.
Note
• Do not touch the moving paper while printing.
• Do not remove the memory card while printing.
• Do not pull out the trash box while printing.
• When an error window or information window is displayed,
refer to pages 46 to 50.
I Cancelling the print quantity (set quantity)
When the [BACK] button is pressed at the "after print quantity setting" window, the "SET
QUANTITY" window is displayed.
Use ab to the select the desired item, and press the [SET] button.
Note
• The item that is displayed varies depending on the print mode.
SET CURRENT FRAME TO 0: Sets the number of prints of the selected frame to 0.
SET ALL FRAMES TO 0: Sets the number of prints of all the frames to 0.
SELECT ALL FRAMES: Switches from the "EACH FRAME" mode to the "ALL FRAMES" mode.
SET EACH FRAME: Switches from the current "ALL FRAMES" mode to the "EACH FRAME" mode.
DESELECT THIS FRAME: Cancels the selected frame from the specification.
DESELECT ALL FRAMES: Cancels all the frames from the specification.
NO. OF SET: 1: Sets the quantity of print sets to be printed to 1.
DESELECT CHOSEN FRAME: Cancels the selected frames from the specification.
EXIT AND BACK TO MENU: Finishes frame selection and returns to menu.
BACK TO RANGE SETTING: Returns to frame selection zone determining.
Enjoy various printing! 2
T I P
• To halt printing while printing
multiple prints, press the
[BACK] button.
21