Table of Contents
Advertisement
2
Enjoy various printing!
ID PRINT
Prints up to 24 frames of the picture of the chosen size on one sheet of paper.
Setting ID print
1
Load the paper and memory card into the
printer, and press the [ID PRINT] button at the
top of the printer.
2
Use a b to "SIZE&LAYOUT" and press the
[SET] button.
Initial settings:
35 mm × 45 mm × 2
45 mm × 60 mm × 2
126 mm × 85 mm × 1
55 mm × 75 mm × 2
50 mm × 38 mm × 4
3
Use d c to select the pictures you want to print.
When the "STARTUP MODE" setting is "ID
PRINT" (→P. 40), the monitor can be returned
to this window by pressing the [BACK] button
for 3 seconds or longer. However, in this
case, the topmost row setting is automatically
selected for "SIZE&LAYOUT".
4
Use the [QUANTITY] [+] [-] buttons to set the
print quantity.
After setting the print quantity, press the [SET]
button.
5
Press the [PREVIEW] button and check the
pictures to be printed and the print quantity.
30
6
If the preview contents are correct, press the
[PRINT] button.
The Printing window is displayed and printing is
started. At the end of printing, the paper ejects from
the printer and the monitor returns to the picture
window.
• Do not touch the moving paper while printing.
• Do not remove the memory card while printing.
• Do not pull out the trash box while printing.
T I P
• When an error window or information window is displayed,
• The
contents
of
"SIZE&
LAYOUT" can be changed
using "ID SETTINGS" (→P. 32).
T I P
• When the image is 4 frames
or more, and d c is pressed
for 1 second or longer, the
image is quick scrolled.
However, for files other than
Exif (JPEG, TIFF-YC/RGB),
only image type characters
are displayed.
Note
refer to pages 46 to 50.
Enjoy various printing!
2
T I P
• To halt printing while printing
plural prints, press the
[BACK] button.
31
Advertisement
Table of Contents
