Reset Configuration - ADIC SCALAR 24 Installation And Operation Manual

Selection
4 Press and to select the scanner
mode.
5 Press to highlight Execute (
then press .
6 A confirmation screen displays. Press
to dismiss.

Reset Configuration

Reset Configuration allows you to reset your library to the default settings. For more information of the
default values, refer to Setting up your Scalar 24
Path:
Main Menu
Selection
1 From the Setup menu, highlight
press .
Scalar 24 Installation and Operation Guide
) and
Setup Menu
Reset Config
and
Description/Result
Available options are:
• Default: The scanner expects to read and
report to the host six characters. One or two
character optional media identifiers are not
reported.
• Media ID: The scanner expects to read and
report to the host seven or eight characters
(six plus the media identifier).
• Extended: The scanner reads and reports
between five and sixteen characters to the
host.
Your barcode scanner is configured and ready
for use.
on page 19.
Description/Result
Resets the library configuration.
91