Selection
6
A confirmation screen displays. Press
to dismiss.
SCSI/Fibre
SCSI/Fibre allows you to set IDs for the library and drives, configure host access, and set emulation mode.
If you have a fibre library, you can set the fibre loop ID, speed, and topology by means of this menu.
Path:
Main Menu
Set Drive SCSI IDs
The SCSI IDs of the drives identify which IDs the drives use to communicate with the host.
Selection
1
From the Setup menu, highlight
press
.
2
Highlight
and press
3
Press
and
to select the ID you
would like to set for the Drive 1.
Scalar 24 Installation and Operation Guide
Setup Menu
SCSI/Fibre
and
.
Description/Result
Description/Result
Sets the drive SCSI IDs.
You must choose a number between 0 and 15.
The default ID is 1.
77