Scsi Cables; Fc Cables - ADIC SCALAR 24 Installation And Operation Manual

SCSI Cables

Connect your Scalar 24 SCSI Library to the host by means of an LVD SCSI cable with an HD68 connector
Cables of various lengths and connector types are available through ADIC to match your specific
requirements. Typically, a host bus adaptor (HBA) has either an HD68 or VHDCI connection. SCSI cables
connecting the host HBA to the library should not exceed 20 feet in length.
Now you are ready to connect the Scalar 24 to your host computer. Follow the instructions provided in
Getting Started on page 13.

FC Cables

Connect to your Scalar 24 fibre drive by using a Fibre Channel (FC) cable with an LC connection. Before
purchasing Fibre Channel (FC) cables, be sure you have the correct connector on the switch end of the
cable.
Now you are ready to connect the Scalar 24 to your host computer. Follow the instructions provided in
Getting Started on page 13.
12 Description