Shorthand Programming Mode - Avaya IP Office 2420 User Manual

7.4 Shorthand Programming Mode

1. Press Admin or
2. The Admin or Admin1 menu is displayed, similar to the following:
Admin Pages
With the exception of Expl?, the names shown are the features that you can assign to soft keys. When Admin has
been selected, you can display the full name of the feature by pressing Expl?. See
Admin1 Page
3. On the Admin pages, press
4. When the function required is shown, press
5. If the function requires some data to be entered, [ ] is shown at the bottom of the display. Enter the data using the
normal phone keypad.
6. The upper part of the display reverts to showing the functions currently assigned to
7. To select the display key against which to program the new function, press
Caution
· Do not select the slot used for the Admin function. Replacing this function will lock the phone for further
programming until reset through the phone system.
8. If the display slot is not already used, the display shows BUTTON PROGRAMMED!.
To end programming, press
·
To continue programming other functions, press
·
9. Repla, Keep and Delet are shown along the right-hand edge of the display.
To replace that existing function with the one just programmed, press Repla
·
displayed.
To keep the existing function and forget the function just programmed, press Keep
·
To delete the existing function and forget the function just programmed, press Delet
·
2420/5420 Phone
IP Office
Admin 1. See Function Key Programming
and to move through the list of feature.
adjacent to its name.
EXIT.
.
50
or
Cont.
Longhand Programming
and .
.
. BUTTON PROGRAMMED! is
.
.
15-601127 Issue 09a (16 July 2009)
.
53
Page 52