Figure C.48: Trap Configuration; Figure C.49: Snmpv3 Context Table - Advantech EKI-7758F User Manual

A trap manager is a management station that receives traps, the system alerts
generated by the switch. If no trap manager is defined, no traps will issue. Create a trap
manager by entering the IP address of the station and a community string. To define
management stations as trap manager and enter SNMP community strings and selects
the SNMP version.
• Server IP: Enter the IP address of trap manager.
• Community: Enter the community string.
• Trap Version: Select the SNMP trap version type – v1 or v2c.
• Click 'Add'.
• To remove the community string, select the community string that you have defined
and click 'Delete'. You cannot edit the name of the default community string set.
SNMPv3 Context Table
Configure SNMP v3 context table. Assign the context name of context table. Click 'Add'
to add context name.

Figure C.49: SNMPv3 Context Table

Figure C.48: Trap Configuration

121