Figure C.13: Ip Configuration—Dhcp; Figure C.14: Ip Configuration—Auto Range - Advantech EKI-7758F User Manual

After user click "Apply" button, a popup dialog shows up to ask user entering user
name and password.
Figure C.13: IP Configuration—DHCP
• Auto Range: When the Method is selected as Auto Range, you can fill in the IP
addresses for IP Begin, IP End, Subnet Mask, Gateway, DNS Server1 and DNS
Server2 column fields to assign a range of IP addresses. Or you can press the small
square button (beside the 'Set' button) to load discovery filter as the IP distributing
range. Press the 'Set' button to carry the setting into effect, and then the device will
get an IP address from this assigned range.
Figure C.14: IP Configuration—Auto range
99