IP Security
IP security function allows user to assign 10 specific IP addresses that have permission to access the
switch through the web browser for the securing switch management.
• IP Security Mode: when this option is in Enable mode, the Enable HTTP Server and Enable Telnet
Server check boxes will then be available.
• Enable HTTP Server: when this check box is checked, the IP addresses among Security IP1 ~ IP10
will be allowed to access via HTTP service.
• Enable Telnet Server: when checked, the IP addresses among Security IP1 ~ IP10 will be allowed to
access via telnet service.
• Security IP 1 ~ 10: Assign up to 10 specific IP address. Only these 10 IP address can access and
manage the switch through the Web browser
• And then, click Apply button to apply the configuration.
Note
Remember to execute the "Save Configuration" action, otherwise the new
configuration will lose when switch power off.
Figure 3.20: SNTP Configuration
51
Chapter3