Figure 3.39: Trap Configuration Interface - Advantech EKI-7659CPI User Manual

Trap Configuration
A trap manager is a management station that receives traps, the system alerts generated by the switch. If
no trap manager is defined, no traps will issue. Create a trap manager by entering the IP address of the
station and a community string. To define management stations as trap manager and enter SNMP
community strings and selects the SNMP version.
IP Address: Enter the IP address of trap manager.
Community: Enter the community string.
Trap Version: Select the SNMP trap version type – v1 or v2c.
Click Add .
To remove the community string, select the community string that you have defined and click
Remove . You cannot edit the name of the default community string set.
SNMPV3 Configuration
Configure the SNMP V3 function.
Context Table
Configure SNMP v3 context table. Assign the context name of context table. Click Add to add context
Remove
name. Click
User Profile
Configure SNMP v3 user table..
User ID: set up the user name.
Authentication Password: set up the authentication password.
Privacy Password: set up the private password.
Click Add to add context name.
EKI-7659CPI_Manual_ed33

Figure 3.39: Trap Configuration interface

to remove unwanted context name.
68