Figure C.63: Static Mac Address - Advantech EKI-7758F User Manual

You can add a static MAC address; it remains in the switch's address table, regardless
of whether the device is physically connected to the switch. This saves the switch from
having to re-learn a device's MAC address when the disconnected or powered-off
device is active on the network again. You can add / modify / delete a static MAC
address.
Static MAC Address
You can add static MAC address in the switch MAC table here.
• MAC Address: Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
• Port No.: pull down the selection menu to select the port number.
• Click 'Add'.
• If you want to delete the MAC address from filtering table, select the MAC address
and click 'Delete'.
MAC Filtering
By filtering MAC address, the switch can easily filter pre-configured MAC address and
reduce the un-safety. You can add and delete filtering MAC address via this function.
• MAC Address: Enter the MAC address that you want to filter.
• Click 'Add'.
• If you want to delete the MAC address from filtering table, select the MAC address
and click 'Delete'.
EKI-7758F User Manual

Figure C.63: Static MAC Address

132