Figure 3.25: Aggregator Setting; Figure 3.26: Aggregator Information - Advantech EKI-7758F User Manual

Aggregator Information
When you have setup the aggregator setting with LACP disabled, you will see the local static trunk group
information here.
State Activity
When you had setup the LACP aggregator, you can configure port state activity. You can mark or un-
mark the port. When you mark the port and click Apply button the port state activity will change to
Active. Opposite is Passive.
EKI-7758F User Manual

Figure 3.25: Aggregator Setting

Figure 3.26: Aggregator Information

56