Upgrading The System; Rs-232 Settings - HIKVISION Network Camera User Manual

User Manual of Network Camera
start importing configuration file.
Note: You need to reboot the camera after importing configuration file.
2. Click
storage.
Figure 10-14

10.6.4 Upgrading the System

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click
remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process. The camera reboots automatically after
upgrading.

10.7 RS-232 Settings

Purpose:
The RS-232 port can be used in two ways:
 Parameters Configuration: Connect a computer to the camera through the serial
port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port
parameters of the camera.
 Transparent Channel: Connect a serial device directly to the camera. The serial
device will be controlled remotely by the computer through the network.
Steps:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
and set the saving path to save the configuration file in local
Import/Export Configuration File
to select the local upgrade file and then click
Remote Upgrade
Figure 10-15
88
to start